The humid air is an invisible murderer. It is
by：Xintao Technology 2020-08-01
Chemical adsorbent dehumidifiers
This type of dehumidifier is usually found in warm and humid climate. It assimilates the moisture in the air using a desiccant such as silica gel. It consumes more power in comparison of other dehumidifiers. It is most profitable when it works with gas heat for warmth alternates.
A number of people use salt to absorb moisture from the air. The wet resolution of the air bath in a pan of salt because the salt dries the air and remove water from the sky. Always remember that the sea salt is very corrosive to metals and it is really hard on the skin.
Heat pump dehumidifiers
It is aimed at attracting a fan of indoor coil above the heat alternate coil. It gets two coils first appeal to all the water and the other is to heat the air. Heat pump dehumidifiers are one of the best ways to remove water in the air. For homes where air ventilation is a problem, it is good to choose a heat pump dehumidifier.
How does a dehumidifier better in cold weather? They have sensor-controller and exhaust fan that robotically activated when the humidity reaches an amount greater than the usual standard. In general, people use them in their basement.
Dehumidifiers have lead to an essential requirement of life. If you want to buy one that suits best for your home or office, you can approach to any online stores where you will get the details of all kind of dehumidifiers.
Application of 5A Molecular Sieve Modified Activated Powder in Automotive Polyurethane
By adding a certain amount of 5A active molecular sieve activated powder, it can absorb the trace moisture in the polyurethane coating, avoid the generation of air bubbles in the polyurethane matrix, prolong the service life of the polyurethane, and improve the strength.
PSA nitrogen making
PSA technical(Pressure Swing Adsorption,PSA for short) :it’s a kind of afvanced gas separation technology,based on physical adsorption of gas molecule on the internal surface of adsorbent(porous solid substances),using adsorbents in the same pressure easy to absorb the high boiling point gas,difficult to absorb low boiling point gas.amd under high pressure adsorption amount of absorbed gas increases,under low pressure adsorption of absorbed gas to reduce the features to achieve gas separation.