Xintao Metal Perforated Plate Corrugated Packing
Xintao Metal Perforated Plate Corrugated Packing is assembled after punching, rolling small patterns, and large ripples on the metal thin plate. It has the characteristics of small resistance, uniform air fluid distribution, high efficiency, large flux, and not obvious amplification effect. In negative pressure and pressure operation. The diameter range of the processing filler is φ150mm to 12000mm.
Xintao Metal Perforated Plate Corrugated Packing is a fillers that are stacked in a uniform geometric graphic in the tower. It stipulates the flow of gas and liquid, which improves the phenomenon of ditch flow and wall flow. The pressure drop can be small, but at the same time, it provides more comparison area. It can achieve higher quality and heat transfer effect in the same volume. The uniform, regular, and symmetrical structure of the structure. When there is the same surface area as the bulk fillers, the gap rate of the ripple filler of the metal hole board is greater, with greater flux, and the comprehensive processing capacity is larger than the plate -type tower and bulk filler tower larger. Many, so various general -purpose regulatory fillers represented by metal hole panels are applied in the industry.
Comparison of the advantages and disadvantages of metal perforated plate corrugated packing
The effect of transforming the plate tower with metal hole plates is particularly obvious. Through careful design, manufacturing, installation, and serious operation, the effect of industrial amplification can not be obvious. Due to the advantages of decreased pressure, large volume, and high separation efficiency, it has been widely used in many towers in the fields of fine chemicals, spice industry, refining, fertilizer, petrochemical industry and other fields.
Xintao Metal perforated plate corrugated packing are assembled after punching, rolling small patterns, and large ripples on metal thin plates. It has small resistance, uniform gas and liquid distribution, high efficiency, large flux, not obvious amplification effect and other characteristics.
Mainly apply to negative pressure and pressure operations.
Xintao Metal wire gauze structured packing
Xintao Metal wire gauze structured packing consists of arranged wire mesh pieces pressed into corrugation. Obliquity of corrugation is 45° or 60° and the neighbor two pieces are of opposite directions.
The key advantage of wire gauze structured packing is the high separation efficiency even at very small liquid loads, combined with low pressure drop and low liquid hold-up, making it ideal for the distillation of thermally sensitive products.
Xintao Metal wire gauze structured packing is usually used for multi-stage gas-liquid separation. It has a wide application in the purification, extraction, distillation, cooling and many other possess in the chemical, petrochemical, metallurgic, pharmaceutical and light industry, etc.
Xintao Wire gauze structured packing can be manufactured in any material that is capable of being drawn into wire:
SS304,304L,410,316,316L,etc
Xintao can provide the following specific surface areas:
250 m2/m3, 500 m2/m3, 750 m2/m3, 1000 m2/m3, 1200 m2/m3
Xintao Model: 250AX, 500BX, 700CY
Xintao Package:
- Banded with stainless steel belts.
- Packed with carton boxes & wooden boxes
For more details, you can visit xintao’s home page:
You can also contact us in the following ways
E-mail: export@xt988.com
