3A Molecular Sieve: Its Application and Storage

3A Molecular Sieve Application:

The 3A molecular sieve desiccant is a chemical production tower filler that is not missing in the industrial field. The product has a good effect on the drying of water and other gases. It can be used as a desiccant such as natural gas and methane gas. The specific application is as follows:

  1. The dryness of various liquids (such as ethanol)
  2. The dryness of the air
  3. The dryness of the refrigerant
  4. The dryness of natural gas and methane gas
  5. The dryness of unsaturated hydrocarbons and cracking gas, ethylene, acetylene, acryl, and butthonne

Because zeolite 3A molecular sieve has desiccant effects, the product should pay attention to the humidity of the indoor space when storing it. You need to choose the space with a humidity of less than 90, so that the product will not deteriorate during the shelter; It affects the value of the product on the top, and it will also reduce the use cycle of the product; molecular sieve 3A zeolite can dry water in the air. Therefore, select an impermeable position during the product storage process. If the air circulation is not smooth The content can play a good role in protecting the product; it is recommended that you seal packaging before the product storage, so that it can protect the product.

Warm reminder: Molecular sieves should avoid adsorption of water, organic gases or liquid before use, otherwise, they should be regenerated.

The Storage of 3A Molecular Sieve

Molecular sieve adsorbent is very easy to absorb hygroscopic absorption: When preservation, it should not be directly exposed to the air, and should be placed in a dry place. The molecular sieve that has a long storage time should be regenerated before use.

Molecular sieve beads avoid oil and liquid water: oil can block the hole of the molecular sieve. Especially during regeneration, it is possible to carbonize the oil and cause the holes to block. For gas containing oil, the oil and gas should be separated first, and then the molecular sieve is performed. Due to the heat release of molecular sieves when adsorbing water, the liquid water directly contacts with molecular sieves. The performance of the molecular sieve may be dangerous or the molecular sieve may occur.

When the molecular sieve tower with pressure work is regenerated, the internal pressure of the tower should be slowly reduced. If the pressure reduction speed is too fast, it may cause the molecular sieve particles to be broken powder. The higher the regeneration temperature, the safer the regeneration, but the greater the energy consumption of the regeneration, and the life of the molecular sieve may be shortened, so the regenerative temperature is more suitable between 200-350 ° C. The regeneration temperature should not exceed 600 ° C, otherwise the molecular sieve may lose activity.

Contact Xintao

If you have any question, please contact us! 

Facebook
Twitter
Email
Print

Benefit You Get

Strict Quality Control

Xintao has always insisted on quality first, and we will provide you with products that meet international high standards.

Complete Production Line

Xintao Factory is equipped with a series of industry-leading production equipment, with 10 fully automatic integrated production lines.

Professional Service

We adhere to the service concept of customer first. We will provide you with 24-hour free consultation, full-process technical support for products and free sample delivery services, etc.

Get A Free Quote

If you have any question, contact us!
We will contact you by email within 24 hours, please check your email inbox in time.