1/4" 6.35mm POM plastic balls high precision balls G0-G3 6.35mm Derlin balls-Xintao Technology

Related Products

XINTAO Plastic PP Polypropylene Hollow Plastic Balls Sous Vide WaterBall

XINTAO 20mm Sous Vide Balls Insulating Balls 250 Count BPA Free

Isolation Sous Vide Water Balls Ball Hollow PlasticBall for Cooking use

XINTAO Sous Vide hollow Water Balls 250 Count with Drying Bag Plastic Ball

Product Information
Company Profile

1/4" 6.35mm POM plastic balls high precision balls G0-G3 6.35mm Derlin balls

Polypropylene Plastic Balls

Polypropene is a thermoplastic polymer used in a wide variety of applications including packaging and labeling, textiles, stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes.

Polypropylene is mostly hard and flexible, particularly when copolymerized is with ethylene. Polypropylene is economical, and can be translucent when uncolored but is not as readily made transparent as polystyrene, acrylic, or certain other plastics. It is often opaque or colored using pigments. Polypropylene has great resistance to fatigue and a melting point of 171ºC (340ºF)

Material	Polypropylene (PP)
Size	1mm-80mm
Grade	G0-G3 (±0.01-0.05mm)
Density	Around: 0.85g/cm3
Advantage	Has good resistance, chemical resistance, low density (density less than water), low water absorption, the highest melting point of the thermoplastic with excellent electrical insulator and low dielectric coefficient, often used for floating capacity requirements, withblood transfusion, level calibration indicator.
Application	PP ball is mainly used for transfusion, level calibration indicator.

POM Delrin plastic balls

POM, characterized by its high strength, hardness, and stiffness to ~40ºC., is intrinsically opaque white, but it is available in all colors. POM has a density of 1.410-1.420 g/cm³.

POM homopolymer is a semicrystalline polymer (75-85% crystalline) with a melting point of 175ºCelsius. The POM copolymer has a slightly lower melting point of 162-173ºCelsius.

Material	Delrin
Size	1mm-80mm
Grade	G0-G3 (±0.01-0.05mm)
Density	Around: 1.4g/cm3
Advantage	it is similar to nylon, but slightly harder than nylon, slightly larger than the density recommended products applied to the required low water absorption
Application	POM ball table and drawer slide device is typically used, bearings, rollers, valves, and electronic apparatus, sailing apparatus.

PA66 Nylon plastic balls

Material	PA66( Nylon)
Size	1mm-100mm
Grade	G0-G3 (±0.01-0.05mm)
Density	Around: 1.1g/cm3
Advantage	The nylon has preferably the alkali metal, to adapt to the neutral characteristics of petroleum products and all kinds of chemical products.
Application	Used in check valve, light load, the knob pull switch, low-cost, but also for better flexibility requirements, high hardness aspects

PTFE Plastic balls

Material	Teflon Balls-PTFE
Size	1mm-320mm
Grade	G0-G3 (±0.01-0.05mm)
Density	2.1–2.3 g/cm³
Advantage	Based frictionless known material having excellent chemical stability, resistance to corrosion, sealing, high lubricity non-tackiness, electrical insulation and good anti-aging Stamina. Continuous use temperature range of -180 ° C to 250 ° C. PTFE (Teflon ®), ball so excellent frictionless known to most corrosive resistant possessed electrically insulating material
Application	Particularly suitable for use in cryogenic liquids and acids under the conditions of the instrument.

Safety and quality tests are performed strictly to ensure a superior performance of molecular sieve. This product stands out for its good hydrophobic properties. Xintao Technology is an advanced molecular sieve enterprise which is specializing in producing and designing adsorbents. This product stands out for its good hydrophobic properties.

Established in the year 2002 at jiangxi/pingxiang/anyuan/, we, Jiangxi Xintao Technology Co., Ltd., are a leading Manufacturer of premium-quality chemical packings. Having begun our operations as a partnership firm, we are now involved in offering a vast range of products to clients for paint, chemical, adhesive, pharmaceuticals, ink, food, ceramic and other allied industries. The presence of advanced technology, engineering and production equipment has helped us garner a loyal client base. We cater to the process equipment needs of industries such as chemical manufacturing, glass and ceramic, pharmacy, paint & color coating, plastics and much more. We also have a spacious and advanced tool room which helps us to effortlessly meet the requirements of our clients. Our machines facilitate ease of installation and have been designed specially as per the requirements furnished by the clients. All our machines and plants are approved quality experts, who conduct several tests to determine their efficiency.

Favorable rate

100%

Buyer impression

Product Message

*Name

Phone

*E-mail

*Content

社媒暂无评论

20 Years chemicals exporting experience with 42,000㎡ workshop and warehouse.

Sous Vide ball

1/4" 6.35mm POM plastic balls high precision balls G0-G3 6.35mm Derlin balls

1/4" 6.35mm POM plastic balls high precision balls G0-G3 6.35mm Derlin balls

PTFE Plastic balls