XINTAO Silica gel WS and N / H type in drying compressed air
Mainly used of separating light hydrocarbon from natural gas, the product can reduce dew point of hydrocarbon to produce natural gas gasoline , drying natural gas at the same time .Add 20% (wt) HY-W as the protective layer if water drip exits in separation system.
In addition,it can be used as common dryer ,catalyst and its carrier ,variable –pressure adsorption separation agent (PSA). As variable-temperature adsorption separation agent (TSA) at higher temperature, it performs especially suitable.
Silica alumina gel WS type -- water resistant
| Item | Specifications | |
|---|---|---|
| SiO2 % | Approx .97 | |
| Al2O3 % | Approx .3 | |
| Surface area(BET) | m2/g | 650 |
| Pore Volume | 0.45cm3/g | |
| Equilibrium Capacity for | 10% R.H | 4wt.% |
| Water Vapor at 25℃ | 80% R.H. | 42 wt.% |
| Packed Bulk density kg/L | 0.7 | |
| Crushing strength N/particle | 60 | |
| Attrition Rate | 0.05wt. % | |
| Liquid Water Resistant | Yes | |
Silica alumina gel N / H type -- non-water resistant
|
Item |
|
|
Specifications |
|
SiO2 |
% |
|
Approx .97 |
|
Al2O3 |
% |
|
Approx .3 |
|
Surface area(BET) , |
m2/g |
750 |
|
|
Pore Volume |
|
0.4cm3/g |
|
|
Equilibrium Capacity for |
10% R.H |
6.5wt.% |
|
|
Water Vapor at 25℃ |
|
80% R.H. |
42 wt.% |
|
Packed Bulk density kg/L |
0.8 |
||
|
Crushing strength N/particle |
200 |
||
|
Attrition Rate |
|
0.05wt. % |
|
|
Liquid Water Resistant |
No |
||
Copyright © Jiangxi Xintao Technology Co., Ltd. | All Rights Reserved
We are here to help you! If you close the chatbox, you will automatically receive a responsefrom us via email. Please be sure to leave yourcontact details so that we can better assist
